Secondary 4 G3 Science (Physics, Chemistry) brings two disciplines into one examination subject. For students taking the 2027 Singapore-Cambridge Secondary Education Certificate (SEC), its subject code is K326. Physics helps students explain physical behaviour using models, measurements and calculations; Chemistry helps them explain substances and reactions through particles, structures and evidence. The SEAB subject catalogue lists this combination separately from standalone Physics K323 and Chemistry K324.
The most useful starting point is the child’s actual work in both components. Check whether the difficulty comes from understanding a concept, choosing a method, handling mathematics, explaining an answer or working accurately in the laboratory. Secondary 4 preparation should connect earlier upper-secondary learning with the school’s current topics. This guide explains the 2027 school-candidate specification and offers original practice examples and planning suggestions; families preparing for another examination year should check the matching syllabus.
- Exact subject: G3 Science (Physics, Chemistry), K326 for 2027.
- Qualification: one combined Science subject, with both disciplines contributing.
- Preparation: learn the ideas, practise calculations, explain evidence and develop practical skills.
- First action: review recent marked Physics and Chemistry work separately.
- Revision: protect time for both components and revisit corrected mistakes.
- School discussion: confirm the teaching sequence, laboratory support and any subject-choice questions.
- Future planning: check the requirements for the intended course and admission year.
Find your next learning step
Choose the question closest to your family’s needs, or read the chapters in order.
Chapter index
Chapters 1–3: Understand the combination
Chapters 4–6: Connect Physics ideas
Chapters 7–9: Connect Chemistry ideas
Chapters 10–12: Use evidence and diagnose
Chapters 13–15: Plan the next step
CHAPTER 1 OF 15 · Understand the combination
1. What the subject title means for your child
Secondary 4 identifies the school year. G3 identifies the subject level. Science (Physics, Chemistry) identifies the particular combination. Keep all three pieces of information together when finding resources or discussing progress. A worksheet headed simply “Science” may belong to a different level, combination or syllabus.
The distinction between one combination and two standalone subjects matters. A student registered for K326 is preparing for one Science result, rather than independent standalone Physics and Chemistry results. The official subject list is a useful check when a bookshop label or an older resource uses unfamiliar wording.
Use the subject name without labelling the child
A child may reason confidently about circuits and still need help with chemical equations. Another may understand reactions but lose accuracy when rearranging a formula. These differences are useful information. They help adults choose the next lesson, rather than make a general judgement about whether the child is “good at Science”.
Under the SEC, the certificate records the subjects and levels taken; school candidates register through their schools. These arrangements are explained in SEAB’s SEC overview. Ask the school to confirm the student’s registered combination before making decisions about revision materials.
Keep a simple record inside the Science folder: K326, examination year, current Physics topic, current Chemistry topic and the next assessment. Update it when the school moves on. The purpose is practical: the student and supporting adults should be discussing the same course and the same immediate task.
During initial learning, a chapter title often tells a student what method to use. A worksheet headed “Electrical resistance” has already narrowed the decision. Mixed revision removes that clue. The student must identify what is happening, select a useful relationship and explain why it fits.
Secondary 4 therefore involves organising knowledge as well as adding knowledge. The school decides its teaching sequence across upper secondary. A national examination syllabus should not be read as a promise that every listed idea will first be taught in Secondary 4.
Use the specification to check scope. Physics spans measurement, mechanics, thermal ideas, waves, electricity, magnetism and radioactivity. Chemistry connects experimental methods, particles, bonding, calculations, reactions, periodic patterns, organic substances and air quality. The examples below illustrate selected connections rather than replace that complete checklist.
Build connections instead of collecting isolated notes
Consider energy. A moving trolley has kinetic energy. An electrical device transfers energy. A chemical reaction can release energy to its surroundings. The situations differ, but a student benefits from asking the same opening questions: what is the system, what changes, and where does energy go?
This does not mean that every explanation can use the same words. Explaining a temperature change in a chemical reaction requires different detail from calculating electrical energy. Connections help students find a starting point; precise subject knowledge completes the answer.
A useful revision page has three columns: an idea, a question where it applies and a mistake to avoid. For current, an example might show a series circuit, while the mistake says that current is not used up by a resistor. For chemical equations, the mistake might be changing a chemical formula while trying to balance the equation.
Ask the student to explain one entry without reading it. If the explanation stops at a memorised phrase, return to a small example. A short page that the child can use independently is more valuable than a complete-looking notebook that remains difficult to interpret.
The table summarises the 2027 K326 assessment scheme. K326 candidates take Papers 1, 2, 3 and 5.
| Paper | Duration | Marks | Weighting |
|---|---|---|---|
| 1: Multiple choice, both components | 1 hour | 40 | 20% |
| 2: Physics written responses | 1 hour 15 minutes | 65 | 32.5% |
| 3: Chemistry written responses | 1 hour 15 minutes | 65 | 32.5% |
| 5: Practical, both components | 1 hour 30 minutes | 30 | 15% |
Paper 1 has 40 compulsory questions with approximately equal coverage of the components. Each written component paper has a compulsory 55-mark Section A and a 10-mark Section B requiring one of two questions. Practical work includes one or two compulsory questions for each science.
Turn the structure into a balanced plan
A student needs to practise choosing an answer, constructing an explanation and producing reliable experimental evidence. Strong performance in familiar multiple-choice questions should not hide difficulties with written reasoning or laboratory work.
Here is an illustrative weighting calculation, using invented practice scores. A student scores 28/40 in Paper 1, 39/65 in each written component, and 24/30 in practical work. The contributions are 14, 19.5, 19.5 and 12 percentage points, giving 65 overall. This calculation demonstrates weighting; it predicts neither an examination grade nor an admission outcome.
Use component results to choose useful practice. If Chemistry explanations lose marks while Physics calculations are secure, the next week’s plan should reflect that evidence. Keep some Physics practice to maintain fluency, while giving the identified Chemistry weakness sustained attention.
CHAPTER 4 OF 15 · Connect Physics ideas
4. Physics: make motion, forces and energy visible
Start a physical problem with a sketch and a sentence describing the situation. Identify the object being considered. Label known quantities with units. This small pause helps prevent a student from choosing an equation simply because its symbols resemble the numbers in the question.
Worked example: a trolley changes speed
A trolley of mass 2.0 kg increases its velocity from 1.0 m/s to 5.0 m/s in 4.0 s, moving in a straight line with constant acceleration. Its acceleration is the change in velocity divided by time: (5.0 − 1.0) ÷ 4.0 = 1.0 m/s². The resultant force is mass multiplied by acceleration: 2.0 × 1.0 = 2.0 N.
If the forward driving force is 3.0 N, an opposing force of 1.0 N would give that resultant. The resultant is the combined effect of forces on the trolley. It is not automatically the size of any one force shown in a diagram.
Now ask a different question: what if the trolley continues at constant velocity? Its acceleration is zero, so the resultant force is zero. Individual forces may still act and balance. This distinction repairs the common assumption that a moving object must always have a forward resultant force.
Worked example: energy in lifting
A 3.0 kg load is raised vertically by 2.0 m. Taking gravitational field strength as 10 N/kg for this example, its increase in gravitational potential energy is 3.0 × 10 × 2.0 = 60 J. If the lifting device receives 100 J of energy, its useful energy efficiency is 60 ÷ 100 × 100% = 60%.
The remaining energy is transferred elsewhere, such as to the surroundings through heating. It has not disappeared. Ask the student to identify the useful output before calculating efficiency; changing the task can change which output is considered useful.
When checking an answer, examine the model as well as the arithmetic. A correct multiplication cannot repair an incorrect decision about the force, distance or energy transfer involved.
CHAPTER 5 OF 15 · Connect Physics ideas
5. Physics: connect particles, heating, waves and radiation
Particle explanations work best when the student names what changes. When a solid becomes warmer, its particles vibrate more vigorously. Saying only that the particles “move more” is often too loose. The explanation should connect the microscopic behaviour to the observation being explained.
Compare that with convection in a fluid. A warmer region may expand, becoming less dense than surrounding cooler fluid. Its movement and the replacement by cooler fluid create circulation. Writing “heat rises” leaves out the material that moves and the density difference responsible.
Worked example: a wave calculation
A wave has frequency 5.0 Hz and wavelength 0.80 m. Using speed = frequency × wavelength gives 5.0 × 0.80 = 4.0 m/s. Frequency describes how many complete oscillations occur each second; wavelength is the distance between neighbouring points at the same stage of an oscillation.
Ask the student to label these quantities on an appropriate diagram. If they identify the height of the wave as its wavelength, further multiplication practice will not solve the misunderstanding. The diagram reveals where teaching should restart.
Worked example: half-life
Suppose a radioactive sample has an activity of 800 Bq and a half-life of three hours. After nine hours, three half-lives have passed. Repeated halving gives 800 → 400 → 200 → 100 Bq. This is the expected activity calculation for a large collection of unstable nuclei, rather than a prediction of when an individual nucleus will decay.
The calculation and its explanation do different jobs. The numbers show the change; the explanation identifies why the change is described statistically. Encourage students to state what a number represents instead of leaving a sequence of calculations without a conclusion.
CHAPTER 6 OF 15 · Connect Physics ideas
6. Physics: understand the circuit before calculating
Electrical questions become easier to organise when students trace the connections. Components drawn beside each other are not necessarily in series; components drawn on different parts of a page are not necessarily in parallel. Identify junctions and branches before using resistance formulae.
Worked example: two resistors
Consider ideal 3.0 Ω and 6.0 Ω resistors connected in series across a 9.0 V supply. The total resistance is 3.0 + 6.0 = 9.0 Ω. The current is 9.0 ÷ 9.0 = 1.0 A. The potential differences are 3.0 V and 6.0 V respectively, adding to the supply potential difference.
Now connect those resistors in parallel across the same ideal supply. Each branch has 9.0 V across it. The branch currents are 9.0 ÷ 3.0 = 3.0 A and 9.0 ÷ 6.0 = 1.5 A. Their sum is 4.5 A, and the effective resistance is 9.0 ÷ 4.5 = 2.0 Ω.
The examples use ideal components and a source that maintains its stated voltage. Real devices have operating limits. The purpose is to examine circuit relationships on paper, rather than suggest connecting household electrical equipment.
Explain what remains the same
In the series arrangement, the current is the same through both resistors. In the parallel arrangement, each branch has the same potential difference. Students often remember both statements but attach them to the wrong arrangement.
A helpful correction is to redraw the circuit and write the relevant statement beside it before calculating. Then check the answer physically: adding a parallel conducting path should not increase the effective resistance above the resistance of either branch.
Use this approach whenever an answer looks surprising. A reasonableness check will not replace working, but it can expose a mistaken relationship while there is still time to repair it.
CHAPTER 7 OF 15 · Connect Chemistry ideas
7. Chemistry: explain properties through particles and structure
Chemistry asks students to move between what they observe and the particles that explain it. A substance might melt, dissolve or conduct electricity. The explanation depends on the particles present, their arrangement and whether charged particles can move.
Why an ionic substance behaves differently in different states
In solid sodium chloride, ions occupy fixed positions within a giant ionic structure. They cannot move freely through the solid to carry charge. When the compound is molten, the ions can move and carry charge. The useful explanation names ions and their mobility.
A weak answer may say that a solid “has no electrons”. That is not the reason for its lack of electrical conduction. Another may say that melting creates the ions. The ions were already present; the change in their ability to move matters.
Invite the student to draw a small labelled representation of the solid and the molten substance. The drawing need not be elaborate. It should show what remains the same and what changes. Use it to build a two-sentence explanation.
Separate mixtures, compounds and changes of state
Salt dissolved in water can be separated by suitable physical methods. A reaction that produces a new compound involves a chemical change. Melting ice changes its state without changing water into another chemical substance.
These distinctions affect the method chosen in a problem. Filtration separates an insoluble solid from a liquid; it does not remove dissolved salt from saltwater. Ask the student what reaches the filter paper, what can pass through and where the desired substance will be found afterwards.
Precise reasoning here supports later work. If a student confuses an atom with an ion, chemical formulae may seem arbitrary. Repair the particle picture first, then return to the written symbol or equation that represents it.
CHAPTER 8 OF 15 · Connect Chemistry ideas
8. Chemistry: make equations and quantities agree
A balanced equation records a relationship between reacting amounts. Students should read that relationship before substituting into a formula. The coefficients apply to the numbers of particles or amounts in moles; they are not automatically a ratio of masses.
Worked example: reacting magnesium
For this paper exercise, magnesium reacts completely with excess hydrochloric acid: Mg + 2HCl → MgCl₂ + H₂. Take the relative atomic mass of magnesium as 24 and use a gas molar volume of 24 dm³/mol at the stated room conditions.
A 1.20 g sample of magnesium contains 1.20 ÷ 24 = 0.0500 mol. The equation shows one mole of hydrogen for each mole of magnesium, so 0.0500 mol of hydrogen forms. Its volume is 0.0500 × 24 = 1.20 dm³, or 1200 cm³.
The word “excess” is doing useful work: it tells us that enough acid is available for the magnesium to react completely. If quantities for both reactants were specified without that assurance, the student would need to consider whether either reactant runs out first.
Worked example: solution concentration
A solution has concentration 0.200 mol/dm³. What amount of dissolved substance is present in 25.0 cm³? Convert the volume first: 25.0 cm³ = 0.0250 dm³. Then amount = concentration × volume = 0.200 × 0.0250 = 0.00500 mol.
An answer of 5.00 mol suggests that the unit conversion was missed. Ask the student to write the unit alongside every quantity before using the calculator. This makes the mismatch visible.
Keep the chemical formula unchanged when balancing
For magnesium burning in oxygen, the balanced equation is 2Mg + O₂ → 2MgO. Changing MgO into MgO₂ would describe a different formula rather than balance the intended reaction. Count each type of atom on both sides and adjust the coefficients.
After any calculation, add one plain sentence identifying the result. “The hydrogen volume is 1200 cm³ under the stated conditions” is more useful than a final number detached from its meaning.
CHAPTER 9 OF 15 · Connect Chemistry ideas
9. Chemistry: explain reactions, observations and environmental choices
A reaction question may combine an observation, a particle explanation and a calculation. Keep those tasks separate while building the answer. Observing bubbles tells us that a gas may be forming; it does not identify that gas without suitable evidence.
Read reaction-rate evidence carefully
Imagine two experiments producing gas from equal amounts of the same limiting reactant. One reaches its final gas volume in 40 seconds; the other reaches that same volume in 80 seconds. The first reaction is faster, but the final amount of gas is the same in this example.
If the only changed factor is the surface area of a solid reactant, a particle explanation should connect a larger exposed surface with more opportunities for collisions. If temperature is changed instead, the explanation must address particle energies and the frequency of successful collisions. A memorised sentence should not be used without checking the changed variable.
Use observations as evidence
In a written qualitative-analysis exercise, “a blue precipitate forms” describes an observation. Naming a possible ion is an inference. Keeping those categories distinct helps students give the information actually requested.
Suppose a colourless gas makes limewater turn milky. That observation supports identifying carbon dioxide in the usual school test. “There are bubbles” alone is insufficient. The value of the test comes from what it distinguishes.
Evaluate environmental claims with boundaries
When comparing fuels or materials, ask what the comparison includes. A claim about emissions during use does not automatically describe production, transport and disposal. A useful Science answer may acknowledge a benefit while also identifying a condition or limitation.
For a classroom discussion, compare two fictional products with supplied data. Identify the evidence supporting each choice, the tradeoff and the missing information. This teaches students to justify a decision without pretending that one favourable number settles every question.
CHAPTER 10 OF 15 · Use evidence and diagnose
10. Practical work: turn a method into trustworthy evidence
Practical confidence grows through supervised experience with apparatus, careful observation and thoughtful checking. Knowing the appearance of a burette or ammeter on a worksheet is different from using it reliably. Ask the teacher which laboratory routines the child most needs to strengthen.
The practical specification includes suggesting a modification or extension without carrying it out. Preparation should therefore include explaining why an improvement would help.
Make a specific improvement
“Be more careful” does not explain how a measurement becomes more reliable. A better suggestion identifies the source of difficulty and a change that addresses it. When measuring short time intervals, timing several repeated events and dividing can reduce the relative effect of reaction time.
For example, 20 oscillations take 32.0 seconds in a hypothetical data set. The mean time per oscillation is 32.0 ÷ 20 = 1.60 seconds. The student should still define an oscillation consistently and follow the instructed method.
Read and record before interpreting
Suppose an initial burette reading is 0.40 cm³ and the final reading is 24.85 cm³. The delivered volume is 24.85 − 0.40 = 24.45 cm³. The final reading alone is not the delivered volume.
Record observations as they occur rather than reconstructing them later. Keep measurements, calculations and conclusions distinguishable. If a result looks unusual, consider the method and recorded evidence; do not replace it with a convenient expected value.
Written practice can support laboratory learning by asking the student to interpret readings, complete tables or explain a source of error. Practical chemistry and electrical investigations should follow the school’s supervision and safety arrangements. The examples here are for discussion and calculation, not instructions to recreate laboratory procedures at home.
CHAPTER 11 OF 15 · Use evidence and diagnose
11. Graphs and explanations: show how the evidence supports the answer
A graph is a relationship between quantities. Read both axes and their units before describing a trend. Check whether the horizontal axis represents time, concentration, voltage or something else. The same-looking curve can mean different things with different axes.
Distinguish an observation from an explanation
“The gas volume increases more slowly” describes a graph. Explaining why requires a scientific reason connected to the situation. If a reactant is being used up, the relevant change might reduce the frequency of successful collisions. State the cause and connect it to the observed effect.
When numerical data are available, use them to support the description. Instead of “the increase is smaller”, compare appropriate values or intervals. Avoid claiming a precise relationship merely because a few plotted points appear to form a pattern.
Worked example: resistance from a graph
A straight-line graph plots potential difference vertically against current horizontally for an ohmic resistor at constant temperature. Two points on the line are (0.20 A, 1.0 V) and (0.60 A, 3.0 V). Its gradient is (3.0 − 1.0) ÷ (0.60 − 0.20) = 5.0 V/A, corresponding to 5.0 Ω.
If the axes were reversed, the numerical meaning of the gradient would change. Reading the axes is therefore part of the calculation, not a decorative preliminary.
For written responses, try a short sequence: identify the relevant idea, apply it to the stated situation, and give the conclusion. This is a study aid, not a compulsory sentence pattern. The final answer should respond directly to the question and include enough reasoning for another reader to follow.
CHAPTER 12 OF 15 · Use evidence and diagnose
12. Find the actual reason marks are being lost
A total score tells a family something about performance, but it does not specify the repair. Review a manageable sample of marked work from both components. Look for a repeated difficulty across several questions before deciding what extra practice is needed.
| What appears in the work | A useful next check | A focused response |
|---|---|---|
| Correct formula, wrong quantities | Can the student describe the situation? | Practise identifying known and required quantities. |
| Incorrect units or conversion | Are units written before substitution? | Use a short set of varied conversion questions. |
| Facts recalled, explanation incomplete | Is the causal link missing? | Explain one example aloud, then write it clearly. |
| Correct solution only with prompting | Which prompt was necessary? | Repeat a related problem later without that prompt. |
| Practical readings inconsistent | Is the apparatus or recording routine insecure? | Discuss targeted laboratory practice with the teacher. |
These categories are working hypotheses. A student might make a unit error because they rushed, because they misread the unit or because they do not understand the conversion. Ask them to show their reasoning before choosing the response.
A correction is complete when the student can use the repaired idea again. Copying a model answer may be a first step, but follow it with a fresh question. Change a number, representation or context so that recognition alone will not carry the student through.
For parents, a useful question is: “Which step became clearer after the correction?” It invites a specific explanation and keeps the conversation on learning. Record one next action rather than turning every returned worksheet into a broad discussion about effort.
CHAPTER 13 OF 15 · Plan the next step
13. Build a week that gives both components attention
A workable plan fits alongside school lessons, other subjects, activities and rest. The following is an example to adapt, not an official study requirement. Begin with the school’s current work and one weakness identified through corrections.
A simple sequence
In one session, revisit a Physics concept and complete a few questions that require choosing a method. In another, work on a Chemistry explanation and a calculation. A later short session can mix both components and include a graph or practical-data question.
Start each session by recalling the relevant idea without looking at notes. Then check the notes, practise and correct. Finish by recording a question to revisit. This gives the next session a clear starting point.
Keep a small amount of familiar work while repairing a weaker area. If every task is difficult, the student may struggle to see progress. If every task is comfortable, the plan may avoid the skill that most needs attention.
Increase independence gradually
A student who needs a complete worked example can first explain its steps, then complete a partly supported problem, then attempt a fresh one alone. Remove support as the student becomes ready. Repeating the same full explanation indefinitely may hide dependence.
Introduce timed practice when the student can use the underlying method. Later, a timed section helps them practise reading, prioritising and moving on. Review both unfinished questions and completed answers; speed should be assessed alongside accuracy and understanding.
Once a week, choose one corrected Physics question and one corrected Chemistry question to retry without help. Compare the new work with the original. The useful evidence is whether the student can now recognise and carry out the method, not merely whether more pages have been completed.
CHAPTER 14 OF 15 · Plan the next step
14. Make subject and post-secondary decisions with current information
Families often want to know whether the combination keeps a particular future option open. Begin with the named course or subject combination and its actual entry requirements. A general statement about “science courses” is too broad to support a consequential decision.
MOE has announced a Post-Secondary Admissions Exercise (PSE) from 2028 for pathways including junior colleges, Millennia Institute, polytechnics and ITE. Its 2026 announcements are the current reference for this change. Families taking SEC examinations in 2027 should check information for their intended admission year.
Bring precise questions to the school
Ask which requirements apply to the child’s intended pathway, whether an institution has additional subject conditions, and how the child’s full subject profile fits. Keep eligibility, likely competitiveness and personal suitability as separate questions. Meeting one stated condition does not guarantee an offer.
If a change of subject combination is being considered, discuss it with the school. Ask about available combinations, timing, material already covered, practical preparation and consequences for later choices. Do not assume that moving between combinations is automatically possible or that a change removes the need for careful preparation.
It is also reasonable for a teenager’s interests to be developing. Make a small shortlist of plausible options and identify the information still needed. The family can then revisit the shortlist as interests and evidence become clearer, without making every Science assignment feel like a final career decision.
Should a stronger Physics component compensate for weaker Chemistry?
Both components contribute to the subject. Use strength in one to support confidence, while identifying a specific repair in the other. A balanced plan protects secure skills and addresses the most persistent gap.
Can standalone Science resources help?
Some questions may be relevant, but do not assume that an entire resource matches K326. Compare it with the current specification and the school’s advice. Extra material can be useful enrichment when deliberately chosen; it should not confuse the student’s required preparation.
Does the student need more practice or more explanation?
Watch one attempt. If the student cannot explain the situation, begin with teaching. If the idea is understood but execution is inconsistent, use targeted practice and checking. If work succeeds only with help, practise transferring the method to a fresh question independently.
What can parents do this week?
Confirm the subject code and examination year. Look at one recent marked task from each component. Ask the child to identify one confusing step, and agree on a small action that addresses it. Bring unresolved curriculum or laboratory questions to the teacher.
For more explanations and revision routes, visit the eduKate Yishun Science learning hub. Keep the next step concrete: one clearer explanation, one accurately completed calculation, or one practical routine understood well enough to use again.
Official references and scope
This guide was checked against the following official sources on 16 November 2026. The worked examples, study routines and parent discussion prompts are original illustrations, not official examination questions or prescribed school schedules.

