Secondary 3 G3 Science (Physics, Chemistry) is one combined Science subject with two components: Physics and Chemistry. Students learn to explain physical behaviour, understand substances and reactions, work with measurements and use experimental evidence. For the 2027 Singapore-Cambridge Secondary Education Certificate (SEC), its code is K326. It is different from taking separate Physics and separate Chemistry as two subjects. Before choosing books or planning revision, check that the school’s subject-combination document actually names Science (Physics, Chemistry). See SEAB’s official subject directory.
The main challenge in Secondary 3 is learning to move confidently between two scientific ways of explaining the world while keeping both components active. One week may involve motion and forces; another may involve particles, equations or chemical quantities, depending on the school’s sequence. This guide uses verified 2027 examination information. Secondary 3 in 2026 normally leads to SEC in 2027; Secondary 3 in 2027 normally leads to SEC in 2028, assuming the usual progression. Families should confirm the examination-year specification and school assessment scope for their child.
- One subject: Physics and Chemistry contribute to the combined Science course and result.
- Correct reference: K326 for the verified 2027 examination; do not substitute separate-subject syllabuses.
- Learning priorities: concepts, scientific language, calculations, data interpretation and supervised practical work.
- School sequence: check what has been taught and what the next assessment covers.
- Revision balance: maintain both components while directing extra help to the specific difficulty.
- Parent support: ask the student to explain a decision, show the working and identify a question for the teacher.
- At home: use notes, diagrams and paper-based problems; follow school supervision for chemical and electrical practical work.

CHAPTER 1 OF 18 · Understand combined Science
1. Understand what the combined subject means
The word “combined” is easy to misunderstand. This course brings two components into one Science subject. A child following it should use the relevant combined-course requirements, not assume that two complete separate-subject syllabuses have been placed together.
For comparison, the 2027 directory lists separate Physics as K323 and separate Chemistry as K324. K326 is the combined Physics/Chemistry entry. Check the subject names before selecting resources.
A parent might hear “Physics paper” and think the child is taking separate Physics. Within K326, that phrase can simply refer to the Physics component’s written paper. The timetable, report and examination entry should be read together.
This matters when organising study. The child needs to develop each component, yet the plan should remain realistic within the whole subject combination. Two poorly understood sets of notes will not become manageable merely because they sit in one folder.
A useful starting record contains the full subject title, school year, expected examination year, current Physics chapter and current Chemistry chapter. Add any specific teacher instructions. It provides a stable reference when online resources use broad labels such as “Science”, “Chemistry” or “upper-secondary revision”.
School offerings differ. The presence of a subject in the national directory does not establish that every school offers it in every package. Obtain the actual options and conditions from the child’s school before making a subject decision.
CHAPTER 2 OF 18 · Understand combined Science
2. Keep the school year separate from the examination specification
Secondary 3 describes the learner’s stage in school. An examination specification describes an eventual assessment. Confusing the two can create unnecessary pressure to finish material that the class has not yet reached.
Use the school’s teaching plan to answer “What should my child understand now?” Use the next assessment notice to answer “What will this school task cover?” Use the relevant national specification to understand the destination. These documents work together, but they serve different purposes.
A website cannot responsibly promise a universal Secondary 3 term-by-term order without the school’s own plan. Physics and Chemistry may also move through their topics at different paces. Compare progress with the actual teaching programme before deciding that the child is behind.
For families entering Secondary 3 in 2027, the 2027 examination figures in this guide are a verified reference, not a guarantee about the 2028 examination. Confirm the correct year when the school provides its guidance and check any updated specification.
When a resource seems difficult, separate untaught material from misunderstood material. An unfamiliar chapter may simply be scheduled later. A familiar chapter with repeated errors deserves a closer look. Both situations call for action, but the actions are different.
CHAPTER 3 OF 18 · Understand combined Science
3. See the two components and their shared tools
Physics and Chemistry provide different routes into scientific questions. One problem may ask how an object’s motion changes; another may ask what happened to a reacting substance. Keep the official combined Science specification beside the school’s topic plan when checking the complete scope.
The examples below illustrate ways of learning; they are not a complete topic list or a fixed teaching order. Use them when they match the school’s current work.
Several tools connect the components. Both require careful measurement, consistent units, attention to conditions and explanations supported by evidence. A graph might show changing speed in Physics or increasing gas volume in Chemistry. In either case, the axes determine what the graph means.
Some symbols need their context. A letter used for one quantity in a Physics equation may appear in another role in Chemistry. Rather than memorising a symbol in isolation, write the quantity name and unit beside it when first learning a relationship.
Build a small shared-skills page with examples from both components. Under “units”, put one distance conversion and one volume conversion. Under “evidence”, put one graph conclusion and one chemical observation. The purpose is to make useful connections while keeping the scientific explanations distinct.
A student who is comfortable in one component can sometimes carry a good habit into the other. Clear tables, labelled diagrams and step-by-step working remain helpful even when the subject matter changes.
CHAPTER 4 OF 18 · Build Physics understanding
4. Begin Physics calculations with quantities and units
A measurement contains a number and a unit. Reading only the number discards information needed to decide whether a calculation makes sense.
Consider an original paper-based example: an object has mass 78 g and volume 30 cm3. Its density is mass divided by volume, so density = 78 ÷ 30 = 2.6 g cm−3. The unit tells us that the mass is 2.6 grams for each cubic centimetre in this example.
If another question requests kilograms per cubic metre, the quantities must be converted consistently. Do not change the unit printed after the answer while leaving the numerical value untouched.
Mass and weight also need separate meanings. For an illustrative calculation using gravitational field strength 10 N kg−1, a 2 kg object has weight 2 × 10 = 20 N. The mass is still 2 kg. The newton identifies weight as a force.
When the student makes a mistake, ask what each number represented before checking the arithmetic. “I multiplied the two numbers” is not yet an explanation. “I multiplied the mass by the stated gravitational field strength to obtain the weight” shows the relationship being used.
For measurement practice, review the scale and the smallest marked division on a supplied diagram. The number of digits written should reflect the information available, rather than the desire to make an answer look more precise.
CHAPTER 5 OF 18 · Build Physics understanding
5. Describe motion before selecting an equation
Motion questions ask about a change over time. Begin with a short description of the event and identify which quantity the question requests.
Suppose a model vehicle travels a total distance of 60 m in 12 s. Its average speed is 60 ÷ 12 = 5 m s−1. This average does not prove that the vehicle travelled at exactly that speed throughout the journey. It summarises the whole interval.
Now suppose a vehicle’s velocity changes from 3 m s−1 to 9 m s−1 in the same direction over 3 s. Its average acceleration over that interval is (9 − 3) ÷ 3 = 2 m s−2. The subtraction finds the change; the division relates that change to time.
A graph should be read in the same way. First identify what each axis represents. On a distance-time graph, the gradient relates distance change to time. On a speed-time graph for motion in one direction, the gradient describes the rate at which speed changes. A familiar-looking line can answer different questions depending on its axes.
Ask the child to say the unit of the calculated gradient. This often exposes a mix-up between speed and acceleration. Then check whether the description matches the graph: steady, increasing or decreasing in the particular quantity shown.
These examples are constructed for learning. Their value is in explaining the steps, not memorising the numbers.
Force diagrams help students avoid treating every force separately when the question concerns the overall effect. Mark the forces acting on the object and their directions before calculating.
Imagine a horizontal model in which a 2 kg trolley has a 16 N force acting to the right and a 6 N force acting to the left. The resultant horizontal force is 16 − 6 = 10 N to the right. Using resultant force = mass × acceleration gives acceleration = 10 ÷ 2 = 5 m s−2 to the right.
Using 16 N alone would ignore the opposing force. Adding 16 and 6 would treat the forces as though they acted in the same direction. The diagram makes the choice of operation visible.
A zero resultant force also needs careful interpretation. It means no acceleration; it does not by itself establish that an object is stationary. An object may already be moving with constant velocity. The student must use the conditions stated in the problem.
For written explanations, connect the force balance to the change in motion. Avoid a loose statement such as “more force means more movement” when the task requires acceleration, direction or an account of balanced forces.
When an answer seems wrong, check the model first: which object is being considered, which forces act on it and which direction has been chosen as positive? An accurate calculation cannot repair an incorrect starting diagram.
Energy, work and power describe related ideas. A learner should be able to identify the question each quantity answers. When a constant force acts along a displacement, work done is force multiplied by that displacement. A 25 N force acting over 12 m in its direction does 300 J of work.
Suppose an invented device receives 1,200 J of energy over 30 s. Its average input power during that interval is 1,200 ÷ 30 = 40 W. Power describes how quickly energy is transferred, so the time interval is essential.
If 900 J becomes the intended useful output, the remaining 300 J has gone into other transfers or stores accounted for by the model. Calling it “lost” must not imply that energy has ceased to exist. Identify where that energy goes using the information supplied.
A child may correctly memorise the work and power relationships but still choose the wrong one. Ask whether the answer should describe an amount of energy transferred or a rate of transfer. Then choose the relationship and check that the final unit matches the quantity requested.
The word “useful” depends on the purpose of the device. Heating may be an intended output in one context and an unwanted effect in another. Read the stated function rather than treating every thermal transfer as automatically wasted.
Use a simple energy account for revision. Write the input, the intended output and the other transfers. Insert quantities only after the account is clear. This makes the arithmetic part of a scientific explanation instead of an isolated substitution exercise.
CHAPTER 8 OF 18 · Build Physics understanding
8. Explain what electrical measurements mean
Electrical questions become easier when the learner distinguishes the quantities being measured. Current, potential difference and resistance should not be treated as three names for the same feature.
In an original example, a resistor has a measured potential difference of 6.0 V across it and a current of 0.30 A through it. Its resistance at those conditions is R = V/I = 6.0 ÷ 0.30 = 20 Ω. The electrical power is P = VI = 6.0 × 0.30 = 1.8 W.
The labels “across” and “through” help the student keep the measurements distinct. On a supplied circuit diagram, ask the learner to identify the component being discussed and which readings belong to it.
In a simple steady series circuit, the current is the same at different positions around the loop. Saying that a component “uses up current” confuses current with energy transfer. The student should explain what changes and what remains consistent in the model.
Do not infer the behaviour of every component from one reading. A question may supply a graph or state conditions that matter. Use the evidence provided rather than assuming that every electrical relationship is linear.
Home revision can use circuit drawings and supplied data. Follow the school’s instructions for practical apparatus and supervision; household mains wiring is not a revision activity.
CHAPTER 9 OF 18 · Build Chemistry and data skills
9. Make Chemistry models explain a property
In Chemistry, a model should explain something observable about a substance or change. A particle diagram is useful when the learner can say what its arrangement represents.
Consider a question about a gas being compressed while the amount of gas remains unchanged. A suitable simple diagram would show the same number of represented particles occupying a smaller space. It should not show each particle becoming smaller merely because the container’s volume decreases.
Ask two questions: “What has changed in the model?” and “What has stayed the same?” This is a practical way to catch confusion between the size of an individual particle, spacing between particles and the amount of material.
Bonding explanations need the same discipline. If a question asks why a material conducts electricity in a particular state, identify the relevant mobile charge carriers. A list of remembered properties does not explain why the electrical behaviour occurs.
For an ionic substance, recognising ions is a start. The explanation must also consider whether those ions can move in the state being discussed. The structural detail should connect directly to the property in the question.
Use drawings, words and symbols together. A student who can point to a diagram, describe its meaning and write an appropriate explanation has several ways to check the same idea. That is more dependable than memorising one paragraph without understanding its parts.
CHAPTER 10 OF 18 · Build Chemistry and data skills
10. Distinguish a chemical formula from an equation coefficient
A chemical formula specifies a composition. A coefficient in an equation specifies a relative quantity of that formula. Confusing the two can undermine both explanations and calculations.
For an ionic example, a calcium ion has charge +2 and a chloride ion has charge −1. Two chloride ions balance the charge of one calcium ion, giving the simplest neutral ratio represented by CaCl2. The subscript belongs to the formula; it is not an optional decoration.
Now consider the symbolic reaction H2 + O2 → H2O. To balance the atoms, write 2H2 + O2 → 2H2O. There are four hydrogen atoms and two oxygen atoms represented on each side.
Changing H2O to another formula would change the substance being represented. Balancing should adjust the coefficients while retaining the correct formulae.
This equation is a paper-based representation, not an instruction to carry out a reaction. During revision, an atom-count table is enough to make the reasoning visible. List each element and compare its count on the two sides.
Ask the student to explain why the coefficient 2 before H2O affects both hydrogen and oxygen counts. The answer reveals whether the learner understands the notation or is relying on an appearance-based rule.
CHAPTER 11 OF 18 · Build Chemistry and data skills
11. Follow the ratio through a chemical calculation
A chemical calculation needs a correct reaction relationship before it needs a calculator. Write down the substance supplied, the quantity given and the substance or quantity requested.
Here is an original theoretical example. Assume that 12.5 g of pure calcium carbonate decomposes completely according to CaCO3 → CaO + CO2. Use relative atomic masses Ca = 40, C = 12 and O = 16. Find the mass of carbon dioxide formed.
- The molar mass of CaCO3 is 40 + 12 + 3(16) = 100 g mol−1.
- The amount of CaCO3 is 12.5 ÷ 100 = 0.125 mol.
- The equation gives a 1:1 ratio between CaCO3 and CO2, so 0.125 mol of CO2 forms.
- The molar mass of CO2 is 12 + 2(16) = 44 g mol−1.
- The carbon dioxide mass is 0.125 × 44 = 5.50 g.
Notice the assumptions: the material is pure, the decomposition is complete and the stated reaction applies. A different question may change one of these conditions.
The 1:1 mole ratio does not imply equal masses. The substances have different molar masses. Ask the learner to explain that distinction before attempting a similar question.
These numbers and workings are teaching examples, not a SEAB question or an official marking scheme. The important habit is preserving the meaning of each step.
CHAPTER 12 OF 18 · Build Chemistry and data skills
12. Connect chemical observations to justified conclusions
A chemical observation records evidence. A conclusion explains what that evidence supports. Students should learn to keep the two stages separate.
If a question reports bubbles, “gas is being produced” may be a reasonable interpretation in the stated context, but the bubbles alone do not identify which gas it is. Further information or a specified test is needed for a more particular conclusion.
Likewise, saying that a solid has “disappeared” does not establish exactly what happened. It may have dissolved or reacted under the stated conditions. Read the full description before choosing the explanation.
For practice, divide a page into “given evidence”, “supported conclusion” and “information still needed”. This simple structure reduces the temptation to jump to a familiar substance name because the scenario resembles a previous question.
Acid-base language also benefits from precision. Concentration describes how much solute is present in a stated volume of solution. It should not be used casually as a synonym for every property of an acid or alkali.
For an original mass-concentration example, 4.0 g of solute in 200 cm3 of solution corresponds to 4.0 ÷ 0.200 = 20 g dm−3. The conversion is needed because the requested volume unit is the cubic decimetre.
Use the teacher’s materials to learn the required tests and observations. Perform chemical procedures in the supervised school setting rather than improvising home identification experiments.
CHAPTER 13 OF 18 · Build Chemistry and data skills
13. Read a changing quantity and its rate separately
Graphs provide an opportunity to connect skills across Physics and Chemistry. In both components, the quantity shown and its rate of change must be distinguished.
Use this invented reaction dataset: a measured gas volume is 0 cm3 at 0 s, 24 cm3 at 10 s, 40 cm3 at 20 s and 48 cm3 at 30 s. The volume continues rising, but the increases over successive ten-second intervals are 24, 16 and 8 cm3.
The corresponding average rates are 2.4, 1.6 and 0.8 cm3 s−1. A rising curve therefore does not automatically mean a rising reaction rate.
Compare this with a distance-time graph. Its height gives accumulated distance, while its gradient relates to speed. The shared mathematical habit is to identify what the vertical value represents and what a change in that value represents.
Do not force the scientific explanations to be identical. A reaction-rate explanation concerns the reacting system and its conditions. A motion explanation concerns the object’s movement. The graph skill transfers; the mechanism must still fit the component.
When comparing two experiments, check which conditions changed. If both temperature and concentration differ, an observed difference cannot automatically be attributed to temperature alone. A sensible conclusion should acknowledge what the comparison can and cannot establish.
CHAPTER 14 OF 18 · Practise, assess and decide
14. Know the verified 2027 examination structure
The 2027 K326 assessment uses the following papers. This is the final SEC structure, not a compulsory template for Secondary 3 school tests.
| Paper | Component and format | Duration | Marks | Weight |
|---|---|---|---|---|
| 1 | Both: multiple choice | 1 h | 40 | 20% |
| 2 | Physics: structured/free response | 1 h 15 min | 65 | 32.5% |
| 3 | Chemistry: structured/free response | 1 h 15 min | 65 | 32.5% |
| 5 | Both: practical | 1 h 30 min | 30 | 15% |
Paper 5 has one or two compulsory questions per component, within 90 minutes overall. Follow school and examination instructions for practical arrangements.
Keep the paper labels attached to the correct course when organising revision. A folder divided according to a different subject’s assessment structure can leave the student looking at the wrong requirements, even when the broad subject name sounds familiar.
The structure also gives a reason to maintain both components. A strong area deserves continued practice, but it should not become an excuse to leave the other area unattended. Plan support around the actual weaknesses shown in school work.
Start with questions drawn from taught material. Longer or timed practice becomes more informative as coverage and understanding grow. A paper containing untaught topics should not be used to declare that a Secondary 3 learner has failed to master the whole course.
CHAPTER 15 OF 18 · Practise, assess and decide
15. Build practical habits in both components
Practical confidence grows from knowing why a measurement or observation is being made. Reading a method, following it and interpreting its outcome are connected tasks.
In a Physics lesson, a student may need to align apparatus, read a scale or organise repeated measurements. In a Chemistry lesson, the student may need to observe a change at the correct stage and describe it precisely. Preparation should address the particular task instead of treating all practical work as one undifferentiated skill.
A useful post-lesson review asks: What did I measure or observe? Why was it relevant? Which step could affect the result? What would I change to make the evidence more useful? Discuss one answer carefully rather than rewriting an entire method without understanding it.
Record actual results. If a reading is unexpected, investigate the reason or discuss it with the teacher. Replacing it with a preferred value removes the evidence needed to learn from the experiment.
When suggesting an improvement, name the specific problem and explain how the change addresses it. “Use better equipment” is vague. A more useful answer identifies the relevant measurement limitation and an appropriate way to reduce its effect, within the problem’s conditions.
Follow the teacher’s safety directions, protective-equipment requirements and apparatus procedures. At home, practise with supplied diagrams, tables and planning questions. Laboratory work belongs in a setting where the activity, materials and supervision are appropriate.
CHAPTER 16 OF 18 · Practise, assess and decide
16. Keep both components active each week
A combined-subject plan should show both Physics and Chemistry. It need not assign identical time every week, because assignments and difficulties vary, but neither component should disappear from the plan for long periods.
Here is a suggested pattern, not an official hours requirement. After a lesson, write one concept in your own words and complete a small relevant task. Later, revisit an earlier question without its solution. At the end of the week, check one Physics item and one Chemistry item independently.
Choose tasks with clear endpoints: explain a force diagram, convert and use a measurement, balance an equation or interpret a reaction graph. “Revise Science” leaves the student with too many decisions before any work begins.
Use separate component sections in the notebook and a shared correction index. A unit-conversion mistake can be recorded once with examples from both components. A misunderstanding about a particular chemical reaction should remain attached to the relevant Chemistry learning.
Build in a short return to corrected work. Looking at a solution can produce recognition without independent understanding. Close it, explain the key decision and attempt a related question later.
If school demands become heavy, reduce the size of the task while preserving the habit of checking both components. A realistic routine produces useful evidence about learning. An ambitious timetable that repeatedly collapses produces little guidance about what to repair.
CHAPTER 17 OF 18 · Practise, assess and decide
17. Diagnose the difficulty before changing the plan
A student may be comfortable with numerical Physics questions and uncertain about chemical explanations, or show the opposite pattern. The overall Science mark can hide these differences.
Review a small selection of marked work from each component. Identify the first incorrect step. Was the concept misunderstood? Was information read incorrectly? Was the relationship chosen correctly but the algebra or unit conversion wrong? Did the answer state an observation when the question required an explanation?
Match the next task to that evidence. A calculation error may need a short mathematical repair. A weak explanation may need a diagram and a conversation. A recurring misreading may require slower identification of the requested quantity before any method is chosen.
Bring specific examples to the teacher. Ask which prerequisite deserves attention, which current tasks the student should continue and when to review progress. The goal is to remain connected to present lessons while rebuilding the missing step.
For subject-combination discussions, consider interest, readiness and the whole timetable. Consult the school about available options and any applicable conditions. When a future course matters, check that course’s current requirements directly rather than assuming that one Science label determines every later possibility.
Set a review point based on observable work: clearer explanations, correct setup of calculations or independent completion of an appropriate mixed set. This gives the family a more useful basis for decisions than a daily judgement about whether the child is “good at Science”.
Does this count as Physics and Chemistry as two separate subjects?
No. Science (Physics, Chemistry) is the combined subject. Confirm the exact entry with the school, particularly when comparing it with a package containing separate Physics and separate Chemistry.
Can a strong component compensate for ignoring the other?
Plan to learn both. Use the assessment structure to understand the course, then use actual school work to allocate support. Protect a strong component while repairing the specific gaps in the weaker one.
Do both components need equal revision time every day?
No fixed daily split is proposed here. Adjust practice around current lessons and identified needs. Review the plan regularly so that extra attention to one component does not turn into long-term neglect of the other.
Must we complete the whole specification in Secondary 3?
Follow the school’s teaching sequence and assessment scope. The examination document describes the eventual course requirements. It does not make every topic an immediate Secondary 3 deadline.
What can a parent do without teaching Science?
Ask the student to explain one decision and point to the evidence used. Help keep feedback and corrections organised. Encourage a specific question for the teacher when the explanation is uncertain.
What should we do first?
Confirm the subject and examination year, then inspect one recent task from each component. Choose a small repair with a clear endpoint. Recheck it on a fresh example later, so the next step is based on independent understanding.
Subject and examination information was checked on 15 November 2026. The numerical scenarios in this guide are original teaching examples, not SEAB questions, reported experiments or official marking schemes.

Leave a Reply