Three learners review open books together at a classroom table, with stacks of textbooks, stationery and a whiteboard in the bright room.

What is Secondary 1 Design and Technology? | Common Curriculum for G1, G2 and G3

Design and Technology (D&T) teaches Secondary 1 students to investigate practical needs, develop ideas and test how a proposed solution works. At lower secondary level, it is a common curriculum subject. For parents, the useful starting point is the problem your child is trying to solve: who needs help, what must the design do, and what evidence shows whether it works? A well-explained improvement can reveal more learning than an attractive object whose purpose the student cannot explain.

Start with the school’s project brief, approved materials and teacher feedback. This guide provides original practice using a lightweight study cue-card holder, simple sketches, measurements and fictional test results. The examples show how to turn “make it better” into a specific design decision. Home practice can use drawing and school-approved paper mock-ups; fabrication with workshop tools belongs in the appropriately supervised learning setting. Use the chapters according to your child’s current task, and ask the school about its assessment arrangements and future subject choices.

  • Understand the need: identify the user, task and difficulty before choosing a solution.
  • Develop an idea: use clear sketches, relevant measurements and a small model.
  • Check the evidence: compare the result with a stated requirement and record what happened.
  • Improve with purpose: change a feature for a reason, then check it again.
  • Support the learner: keep the design decisions with your child and use the teacher’s guidance.

CHAPTER 1 OF 14 · Understand the design need

1. Understand the subject and the school’s plan

Back to contents

The MOE lower-secondary D&T syllabus describes learning through designing and making, with sketching, models, prototypes and evaluation. Its cover retains earlier course names and states implementation from 2017. Yishun Secondary’s 2026 outline explicitly uses that syllabus. Read the document’s teaching framework alongside current school information.

For a family, the important distinction is between learning a design process and simply completing an object. Two students may produce similar-looking holders, yet one can explain the user’s difficulty, justify the dimensions and describe a useful test. The other may have followed a drawing without understanding why the features are there. Their finished objects alone do not tell the whole story.

Find out what the present task requires

Read the school brief with your child. Ask which parts are provided and which decisions the student must make. The teacher may supply a particular material, size or context for the task. Record those conditions before offering a new idea. A clever suggestion that ignores the assigned conditions may not help your child complete the actual work.

Ask what evidence the teacher wants to see: perhaps sketches, measurements, a model, a record of decisions or an explanation. Use the specified format and submission instructions. The examples in this guide are practice activities, not a replacement project or an official assessment template.

If your child says, “I am bad at D&T,” ask for one task they found difficult. Understanding instructions, imagining a shape, recording dimensions and explaining a choice are different challenges. A precise example helps a parent offer useful support and gives the teacher something concrete to discuss.

Keep the latest brief and feedback together. This makes it easier to check whether the next practice activity addresses something the class is learning, rather than adding unrelated work.

CHAPTER 2 OF 14 · Understand the design need

2. Start with a user and a practical need

Back to contents

Our original practice scenario concerns a student who uses small revision cue cards. The student wants to read one card while keeping both hands available for writing or arranging other materials. A card lying flat is inconvenient in this particular situation. This is an invented design brief, not a claim that every student studies in the same way.

Describe the need before selecting an object: “The user wants to view and change a cue card on a small desk.” Immediately announcing “We need a plastic stand” adds a material and solution before checking the conditions. The eventual answer might use a different shape or material, or an existing item might already solve the problem.

Ask questions that leave room for an answer

Try “Show me how you use the cards” and “Which part is inconvenient?” A leading question such as “Wouldn’t a tall stand be better?” invites agreement with the adult’s suggestion. A useful observation might be that the student repeatedly moves the card to make room for a notebook. Record that action separately from your proposed explanation.

Ask permission before observing another person. For home practice, a willing family member can try the fictional task; there is no need to photograph classmates or collect personal information. Keep the focus on how the product would be used.

If two people prefer different arrangements, record whose needs each idea addresses. One person’s preferred viewing position need not suit another. Ask each person to demonstrate the task rather than assuming a preference from age or appearance. A small project can focus on one identified user while acknowledging that a wider range of users would require further investigation.

Distinguish a need from a preference

A user may prefer blue, need the printed words to remain visible and have only a small area available. Those statements describe different considerations. Colour preference can matter, but it does not automatically outweigh visibility or fit. Ask the student to explain which requirement affects the main function and why.

A strong first note could say: “The holder should display one card and allow the user to replace it easily within the available desk space.” It identifies a task and conditions while leaving several possible solutions open. More precise measurements and checks come next.

CHAPTER 3 OF 14 · Understand the design need

3. Turn a need into testable requirements

Back to contents

A design brief explains the job. Specifications state the requirements against which an idea can be checked. For this practice, use a cue card measuring 90 millimetres wide and 60 millimetres high, with a blank strip along its lower edge. Agree on where the printed information begins before designing a support that might cover it.

The following requirements are invented for the exercise. They are deliberately modest so that the learner can investigate them with paper models and a ruler. They are not national curriculum standards or school marking criteria.

RequirementHow to check it
Hold one 90 × 60 mm cue card.Use the same practice card for each design.
Occupy no more than 120 × 100 mm of desk space.Measure the model’s width and depth in its intended position.
Leave the printed information visible.Check that supports do not cover the agreed printed area.
Allow a card change within 10 seconds.Use the same defined start and finish in three trials.
Remain upright for 30 seconds on the level desk.Observe three trials in still air with the same card.
Original cue-card holder requirements

Make vague words useful

“Small,” “easy” and “stable” can begin a discussion, but they need context. Small enough for which space? Easy for which user? Stable under which test conditions? A specification helps the child answer those questions before declaring success.

Define the timed task carefully. The user starts with the replacement card in the same marked position, removes the displayed card, inserts the replacement and releases it. Agree that timing stops when the replacement is supported without being held. A different timing procedure could produce a different result.

Choose requirements that fit the purpose. If the teacher’s project has different conditions, use those instead. Adding a demanding feature simply because it sounds impressive can create extra work without helping the user. A requirement should have a reason the student can explain.

CHAPTER 4 OF 14 · Investigate and develop ideas

4. Research the problem without guessing

Back to contents

Research should resolve a question that affects the design. For the cue-card holder, relevant information includes the card’s dimensions, available space and the way the user changes cards. A long collection of unrelated product pictures may look substantial while leaving those questions unanswered.

Keep observation and interpretation separate

Suppose a user takes fourteen seconds to replace a card. That is an observation under the test conditions. “The opening is too narrow” is a possible explanation. To investigate it, the student could watch where the movement slows and compare a modified opening. They should not present the explanation as established before checking.

Use a simple note with three entries: what happened, what it might mean and what to check next. For example: “The card caught at the left corner; that edge may obstruct insertion; inspect the opening and test a changed shape.” The third entry turns a guess into an investigation.

Analyse an existing product for a purpose

If you examine an existing card holder, ask what supports the card, how it stands and how the user inserts information. Discuss the relationship between a feature and a job. Copying its decoration does not show why its structure works, and the existing product may have been designed for different cards or conditions.

Record the source of an image or factual claim used in schoolwork, following the teacher’s instructions. Distinguish a manufacturer’s dimensions from a measurement your child made. If the information is missing, label it as unknown rather than estimating it silently.

Keep research proportionate. One useful measurement and one clear observation can guide a revision more effectively than many pages of copied descriptions. When the child has enough information to test a reasonable idea, move to the next step and return to research if a new question arises.

CHAPTER 5 OF 14 · Investigate and develop ideas

5. Make sketches that explain an idea

Back to contents

A useful design sketch helps another person understand what is proposed. It can be simple and untidy while still communicating the main shape, where the card sits and how the support stands. Begin with a pencil and a few labelled lines rather than asking the child to produce a polished picture immediately.

For this original exercise, consider three different arrangements: a shallow pocket, an open support with a lower retaining edge, and a folded backing with a wide base. Each is a starting idea, not a guaranteed working solution. The student should explain how a card would enter, stay in place and be removed.

Change a functional feature between ideas

Three drawings in different colours may show one idea with three appearances. To explore alternatives, change something that affects use: the position of the opening, the support arrangement or the way the model folds. Ask what the change might improve and what new difficulty it might introduce.

Use short annotations beside the relevant part. “Opening allows the card to slide in from above” communicates an intention. “Looks nice” is less informative unless the student explains what the user prefers and how the appearance serves the purpose.

Use another view when it answers a question

A front view might show whether the text is covered, while a side view could clarify how the card leans against the support. A view from above can show the space occupied on the desk. These views are useful because they answer different questions about the same proposal.

Check that the views agree. If the front drawing has one support and the side drawing suggests a different arrangement, ask the child which version they intend. Resolving the mismatch on paper is easier than discovering it after making the model.

For a child who lacks confidence in drawing, start with rectangles and arrows. Ask them to point to a feature and describe its purpose, then add the label. Clear communication can grow through short, specific improvements without requiring decorative drawing skill.

CHAPTER 6 OF 14 · Investigate and develop ideas

6. Measure dimensions and allow room for use

Back to contents

Measurements make an idea checkable. In the practice brief, a 90 × 60 mm card is 9 × 6 cm. The permitted 120 × 100 mm desk footprint is 12 × 10 cm. Keep the units visible on every measurement so that a reader does not mistake centimetres for millimetres.

Check the dimension that controls the fit

Imagine a model drawn 130 mm wide and 80 mm deep. Its rectangular footprint has an area of 10,400 square millimetres, less than the 12,000 square millimetres in the permitted rectangle. Nevertheless, as drawn it exceeds the 120 mm width limit. Comparing areas alone does not establish that the design meets both dimensional requirements.

A proposal measuring 115 mm wide and 85 mm deep meets those two size limits. That does not yet establish that it holds the card or remains upright. Each requirement needs an appropriate check; one successful calculation cannot stand in for the whole evaluation.

Measure the object, then test the interaction

A card exactly 90 mm wide may be awkward to insert into a model whose opening is intended to be exactly 90 mm. The finished opening, folded edges and the way the user holds the card all matter. Rather than prescribing one universal extra allowance, make an adjustable paper model and investigate the fit.

Start the ruler reading at its zero mark, not automatically at the physical end of the ruler. Hold it in line with the dimension being measured. If a result looks surprising, measure again and check the units before changing the design.

Mark which dimensions are requirements and which are proposed dimensions. The card size is given in this exercise; the base width is a design choice within a limit. This distinction helps the child know what they may change.

Use actual measurements for any model you make. A diagram viewed on a phone or a printout resized by a printer is not automatically full size. Label a sketch “not to scale” when its appearance is only illustrative.

CHAPTER 7 OF 14 · Investigate and develop ideas

7. Compare materials for the intended job

Back to contents

Material choice begins with the job and the permitted working methods. For a home mock-up, choose clean paper or card approved for the task. A final school prototype may use different materials and processes under teacher supervision. A paper model can investigate shape and use without proving how another material will behave.

Ask a question you can actually investigate

Consider two available paper samples. Instead of deciding that the thicker-looking one must be best, ask which can form the proposed shape, hold the lightweight card and be changed conveniently. Keep the design and test conditions similar when comparing the samples, so that several differences do not become mixed together.

Describe observations precisely. “This folded support bent backwards when the card was inserted” identifies a problem. “Paper is useless” makes a broad claim from one sample and arrangement. The difficulty could involve the material, fold, size or connection; further comparison is needed.

Balance suitability and resource use

Suppose one trial shape can be made from a small piece already available, while another uses a much larger sheet. Compare whether the extra material provides a useful benefit. Avoid claiming that less material is always the better design: a design that cannot perform its task still needs improvement.

Keep scraps that remain clean and suitable for another small model. Before taking materials from home to school, check the teacher’s instructions. Do not substitute an unfamiliar adhesive or material merely because it appears stronger or is available in a cupboard.

Before preparing pieces, draw a proposed layout on scrap paper. Check whether the parts are present, labelled and sized for the model. This can reveal a missing support or an unnecessarily large piece before material is used. If the layout changes, record the reason. Planning resource use is another design decision the child can explain, rather than an instruction to make every part as small as possible.

The child’s explanation should connect choice with evidence: “I used this card for the next mock-up because it kept the intended fold during our trial, and it was approved for the activity.” That is more informative than naming a material without explaining why it suits this stage of the work.

CHAPTER 8 OF 14 · Make, test and improve

8. Use a small mock-up to answer one question

Back to contents

A mock-up is a model used to explore an idea. Its value depends on the question it helps answer. For the cue-card holder, one model might investigate the opening, while another explores the base arrangement. You do not have to complete every decorative detail before learning whether the main shape is workable.

Keep the first model deliberately simple

Use school-approved paper, prepared card pieces and permitted joining materials. Fold or arrange the pieces to represent the chosen support. Label this as a practice model for a lightweight paper card. It is not designed to carry a phone, a tablet or another valuable object.

Ask the student to state the question before changing anything: “Can I replace the card without the lower edge catching?” Then try that action and record what happens. If the aim is to study the opening, unnecessary decoration can wait.

Identify what the model represents

A paper model can show the space occupied and allow a basic trial with the card. It cannot automatically establish the strength, finish or working process of a future wooden, metal or plastic version. When discussing the result, keep the conclusion tied to the model and test actually used.

Make a simple record before dismantling or changing a model: a labelled sketch and a few observations may be enough for home practice. Follow the school’s documentation requirements for assigned work. The point is to preserve the reason for the next decision, not to create a display of every scrap.

If the first attempt does not work, ask what it has revealed. A fold that hides part of the text has identified a visibility problem. A base that moves during insertion has identified a question about support. A model that exposes a difficulty early can still be a useful part of the design work.

CHAPTER 9 OF 14 · Make, test and improve

9. Test against the requirements and read the results

Back to contents

Use the same cue card, level desk and agreed task when comparing models. Let the person understand the procedure before timing. Record the observations honestly, including unsuccessful trials. The following results are invented to teach evaluation; they were not collected from pupils or tested products.

CheckModel A: pocketModel B: open support
Width × depth110 × 90 mm115 × 85 mm
Card-change times14, 12, 13 seconds8, 9, 7 seconds
Upright for 30 seconds3 of 3 trials2 of 3 trials
Printed area visibleYes in these checksYes in these checks
Fictional tests of two cue-card holder mock-ups

Compare one requirement at a time

Both models fit within the stated width and depth. Model A remains upright in all three trials, but none of its card changes meets the ten-second target. Model B meets the time target in all three trials but falls short of the upright requirement once. Neither meets every requirement in this dataset.

The mean card-change time for A is (14 + 12 + 13) ÷ 3 = 13 seconds. For B it is (8 + 9 + 7) ÷ 3 = 8 seconds. That five-second difference summarises these trials. It does not prove that B will be five seconds faster for every user.

Make the limitation part of the answer

Three trials are a small amount of evidence. Repeated practice may affect speed, and another user may interact differently with the model. When making a comparison, keep the procedure consistent and consider alternating the order in which models are tried. Record any changed conditions.

A useful conclusion is: “B allows faster changes in these trials, but we need to investigate why it did not remain upright once.” This identifies both a promising feature and a specific next question. Choosing B simply because its mean time is lower would overlook another requirement.

CHAPTER 10 OF 14 · Make, test and improve

10. Improve one feature and record the reason

Back to contents

Return to Model B’s unsuccessful upright trial. Before changing the base, ask what happened: did a support fold move, did the card slip, or was the model disturbed? The table records an outcome, not its cause. A useful revision begins with an observation that helps explain the problem.

Work through an original revision note

For this fictional continuation, suppose the test record states that the rear fold opened gradually. The student proposes an additional paper support while keeping the footprint within 115 × 85 mm. The reason is to investigate whether controlling that movement improves the model’s ability to remain upright.

The revised model records card-change times of 8, 8 and 9 seconds, and remains upright for all three thirty-second trials. These invented results support further consideration of the revision under the stated conditions. They do not establish that it can never fall or that the same approach will work in a different material.

Keep a decision trail

A short entry can contain the observation, proposed change, reason, new result and next question. For example: “Rear fold opened; added a paper support; checked whether it reduced movement; model stayed upright in three trials; next check whether the support obstructs folding for storage.” The final question identifies an additional issue, not a result already established.

If several features change at once, record that. An improvement might result from their combination, and the student should avoid claiming certainty about which single feature caused it. When practical, a smaller change can make the comparison easier to interpret.

After a revision, revisit the other requirements too. An extra support might help the model remain upright but obstruct the card opening or increase its footprint. Checking only the previously unsuccessful test could miss a new difficulty. Ask the child to explain which checks should be repeated and why, using the original brief as the reference.

Parents can help by asking for the reason behind a revision. Leave the choice and explanation with the child. An adult-made solution may look impressive, but it provides little evidence of the student’s own decision-making if the child cannot explain how it developed.

CHAPTER 11 OF 14 · Work with structures and tools

11. Connect structures and movement with a purpose

Back to contents

The lower-secondary framework includes materials, structures, mechanisms and electronics. Your child’s current project determines which ideas are useful to discuss now. These areas do not require adding a moving or electronic feature to every design.

Look for the job a part performs

In the cue-card model, ask which part supports the card, which part contacts the desk and which connection keeps the shape together. Point to each on a sketch. If the child proposes another piece, ask what problem it would address and how they would check its contribution.

Consider an original extension: the user now wants the viewing angle to be adjustable. One idea is to provide two fixed positions; another is to use a movable support. Compare the intended action on paper first. Which arrangement could be changed easily? Which needs an additional connection? What would stop it moving unintentionally during use?

Read a movement sequence

Draw three small frames showing the support before, during and after adjustment. Add arrows to show the intended movement. Check that a part does not pass through another solid part in the drawing. If the movement remains unclear, a teacher-approved paper model may help reveal the difficulty.

This is a way to investigate a proposal, not a construction plan for an untested mechanism. Keep fingers away from any model’s pinching or catching points and ask the teacher how an assigned practical task should be handled.

If electronics appear in schoolwork, work from the teacher’s circuit, approved components and supervision. For the home card-holder activity, a written note or sketch can show where a proposed feature might go. There is no need to introduce powered parts to demonstrate thoughtful design.

A good explanation connects technology with purpose. “This feature would let the user choose between two angles” is clearer than “I added more technology.” Complexity needs a reason.

CHAPTER 12 OF 14 · Work with structures and tools

12. Follow the approved practical process

Back to contents

The D&T syllabus places safe working practices alongside the knowledge and processes being taught. For an assigned project, the teacher’s demonstration, instructions and approved equipment govern practical work. A written home guide cannot replace that supervision.

Know what can be practised at home

Home practice can focus on understanding the brief, making sketches, measuring a lightweight card and evaluating a simple approved paper model. Use prepared pieces where needed. Tool-based shaping, heating, soldering or machine work should take place only in the appropriately supervised setting with the required instruction.

Before a practical lesson, your child can check the task sequence and prepare questions. “I understand the marking-out step, but I need the teacher to show me the next process” is a useful statement. Recognising an uncertain step is better than guessing how to use unfamiliar equipment.

Plan the sequence without inventing workshop instructions

For the paper exercise, a simple plan might be: check the brief, prepare approved materials, label the model, try the card, record observations and tidy the workspace. A school fabrication plan will be more specific and should follow the teacher’s required order.

If the planned material or tool is unavailable, ask before substituting. A different material can require a different working process, so it should not be treated as an interchangeable replacement merely because it has a similar colour or thickness.

Keep practical feedback specific. If a teacher identifies a problem with preparation or handling, ask what action the child should demonstrate next time. This helps safe habits become observable parts of the work rather than a paragraph copied into a journal.

The parent’s role is to support preparation and follow the school’s boundaries. Completing workshop operations on the child’s behalf at home can bypass both the intended learning and the school’s practical arrangements.

CHAPTER 13 OF 14 · Review learning and options

13. Understand feedback, reporting and later subject choices

Back to contents

Ask the school how its current tasks contribute to the report and what each piece of feedback means. Keep three questions separate: what the student was asked to demonstrate, how the task was assessed and how the result is reported. A reporting band does not explain every strength or difficulty within a project.

Gan Eng Seng School’s current grading page states these common-curriculum bands for Art, D&T and FCE from 2025:

DescriptorMarks
Proficient (PF)70–100
Competent (CP)60–69
Developing (DV)50–59
Beginning (BG)0–49
Reported common-curriculum grading bands

Use the child’s actual report and task feedback to identify the next step. Ask whether the main difficulty concerns the explanation, drawing, practical process or evaluation. Avoid turning one label into a fixed judgement about the student’s creativity or future potential.

Separate present learning from graduating examinations

SEAB lists the following D&T syllabuses for the 2027 Secondary Education Certificate examinations:

Subject level2027 syllabus codeOfficial reference
G1K124SEAB G1 list
G2K234SEAB G2 list
G3K345SEAB G3 list
Later SEC D&T entries, not Secondary 1 task requirements

The examination year and code identify those later syllabuses. They do not prescribe a present Secondary 1 class’s project, timetable or assessment weights. Check the relevant future examination year when that decision becomes necessary.

If your child is interested in continuing D&T, ask the school about its actual upper-secondary options, expectations and selection arrangements. Discuss interest, current evidence of learning and the demands of further work. A successful paper model or a particular reporting band does not by itself guarantee a subject offer.

Before purchasing an examination guide, check its level, syllabus and purpose. A resource for graduating candidates may be poorly matched to a child currently learning how to explain a design need or annotate a first model.

CHAPTER 14 OF 14 · Review learning and options

14. Choose a helpful home routine

Back to contents

Choose one small task that matches current schoolwork. A family might spend a short session clarifying the user’s need, another improving a sketch and another checking a model. A completed question and a useful next step are better goals than filling a large number of journal pages.

What can a parent do without taking over?

Ask the child to explain a decision, point out an unclear label or check whether a measurement has a unit. Let the student choose the change and write the explanation. If you suggest an alternative, present it as something to consider and test rather than a finished answer to copy.

What if drawing is difficult?

Start with a simple outline, one arrow and one label. Ask what another reader needs to understand. A clear view of where the card enters may be more useful than shading the whole product. Use the teacher’s guidance to identify the next drawing skill.

What if the model fails?

Record the actual outcome and ask which requirement was not met. Look for an observation that could guide a change. Keep unsuccessful results visible as part of the investigation; replacing them with invented successful figures prevents the child from learning how evidence informs design.

Does my child need specialist equipment or tuition?

Start with the school’s materials and feedback. Clarify the problem before buying anything. Extra support is most useful when it addresses a specific difficulty, such as interpreting the brief, communicating an idea or explaining test evidence. The activities here can begin with ordinary paper, a pencil, a ruler and approved materials.

How will we recognise progress?

Look for an explanation the student can give independently: a need stated clearly, dimensions that match, a reason for a choice or a revision linked to evidence. Keep one earlier attempt beside the improved version. Ask what changed and why, then use that response to choose the next task with the teacher.

Official sources and further reading

Information checked on 16 November 2026, Singapore time. The cue-card holder brief, dimensions, test data and worked responses are original practice examples.

Back to contents